68k

Notes on old Macs, repairs, and other projects.

Carrera040

3 posts Show All
7 min read

Starting A/UX from System 7.5.5

Once A/UX was running on the Carrera040, my next annoyance was getting into it. The SE/30 normally runs System 7.5.5 from the nuCF card, and A/UX lives in another partition on the same card. I don’t, necessarily, want to boot into A/UX every time.

The A/UX loader typically expects memory to be available at specific locations, and starting with extensions on tends to break this. Starting with extensions off means the Carrera040 isn’t loaded, so now A/UX needs to kick-start the 040 itself. Secondly, the nuCF mapping was handled by an extension before, so now we need the A/UX loader to also map it to a fake SCSI drive for loading purposes.

Read More
12 min read

A/UX on the Carrera040

A/UX 3.1 now boots and runs on my SE/30 with a Carrera040 accelerator and a BMOW ROM SIMM - with System 7.5.3 as the Mac environment, no less.

Getting here took 29 kernel patches, a lot of photos of a frozen screen, and more wrong guesses than I’d like to admit. Here’s what the Carrera does to A/UX (so far as I know, so far), and the patch kit, which is available at the end.

The emulation post covers how the card works and how QEMU emulates it, and the 7.5.3 port covers the Mac side.

As with the rest of this project, a bunch of this was done with bot assistance. If that’s a deal breaker for you, I get it.

Read More
11 min read

Emulating the Carrera040

The MicroMac Carrera040 is a 68040 accelerator for a 68k Macintosh’s PDS slot. Thanks to the Ethernet riser board by Bolle, it can be even be wedged into a SE/30.

The Carrera040 is a very strange board, and isn’t compatible with some things - like A/UX - which would be frankly hilarious to have running on the SE/30.

With a lot of digging and decompiling, it’s possible to get QEMU to emulate the Carrerra040 inside a SE/30 - to at least a first order of approximation - including some of the quirks and device-breaking bugs.

A huge thanks to ZZJ for advice and pointers along the way, his suggestions really helped narrow down the search and backed up a lot of the discoveries.

Most of the patches here center around the Carrera040 inside a SE/30, and expect a 32-bit-clean ROM. I use the BMOW ROM SIMM, but in theory it shouldn’t matter.

All this builds on the work of others reverse engineering the Carrera040 to work in the SE/30 in the first place. Be sure to check out the work at Geekdot for how the SE/30 starting point was even possible in the first place!

QEMU patches are available at the end.

I do software and hardware engineering and reverse engineering for a living, but some of this work was done with bot assistance - if that’s a deal breaker for you, I get it. Frankly, the amount of free time I have to chase fun projects like this is limited, so being able to optimize some of the stages is the difference between doing it at all, or it staying an amusing idea I’d never have a chance to chase down.

Read More