68k

Notes on old Macs, repairs, and other projects.

A/UX

4 posts Show All
7 min read

Starting A/UX from System 7.5.5

Once A/UX was running on the Carrera040, my next annoyance was getting into it. The SE/30 normally runs System 7.5.5 from the nuCF card, and A/UX lives in another partition on the same card. I don’t, necessarily, want to boot into A/UX every time.

The A/UX loader typically expects memory to be available at specific locations, and starting with extensions on tends to break this. Starting with extensions off means the Carrera040 isn’t loaded, so now A/UX needs to kick-start the 040 itself. Secondly, the nuCF mapping was handled by an extension before, so now we need the A/UX loader to also map it to a fake SCSI drive for loading purposes.

Read More
12 min read

A/UX on the Carrera040

A/UX 3.1 now boots and runs on my SE/30 with a Carrera040 accelerator and a BMOW ROM SIMM - with System 7.5.3 as the Mac environment, no less.

Getting here took 29 kernel patches, a lot of photos of a frozen screen, and more wrong guesses than I’d like to admit. Here’s what the Carrera does to A/UX (so far as I know, so far), and the patch kit, which is available at the end.

The emulation post covers how the card works and how QEMU emulates it, and the 7.5.3 port covers the Mac side.

As with the rest of this project, a bunch of this was done with bot assistance. If that’s a deal breaker for you, I get it.

Read More
7 min read

Porting System 7.5.3 to A/UX

A/UX 3.1 is Apple’s Unix for 68k Macs, and its Mac side is stuck at System 7.0.1. It was never updated; Apple moved on to other things (MAE on Solaris and HP-UX, and eventually Copland and Rhapsody, and we all know how those went).

It turns out 7.5.3 can run as the A/UX Mac environment, with a surprisingly small set of patches - and Apple had already done most of the homework for us, in a product almost nobody used.

This post covers how the port came together, what didn’t work along the way, and the patcher that builds it from your own copies of Apple’s files. The patcher is available at the end.

Like the Carrera040 work, a lot of this was done with bot assistance - disassembling, diffing thousands of resources, and grinding through test boots. If that’s a deal breaker for you, I get it.

Read More
10 min read

The nuCF SCSI shim

A/UX only knows how to boot from SCSI disks. zigzagjoe’s nuCF is a CompactFlash card on the SE/30’s PDS slot, which is decidedly not a SCSI disk. Getting A/UX to boot from it meant convincing two different pieces of software that the card is SCSI ID 6: A/UX Startup on the Mac side, and the A/UX kernel itself.

This post covers how the two halves of that shim work.

Read More